Kajian Pelaksanaan Erection Girder pada Proyek Pembangunan Flyover (Studi Kasus Flyover Gelumbang, Kabupaten Muara Enim, Provinsi Sumatera Selatan)
Abstract
Flyover Gelumbang merupakan salah satu infrastruktur transportasi yang dibangun untuk mengatasi masalah kemacetan dan meningkatkan aspek keselamatan transportasi di kawasan Gelumbang, Kabupaten Muara Enim, Provinsi Sumatera Selatan. Proyek ini berada di atas koridor jalan nasional yang berpotongan dengan jalur kereta api aktif, sehingga pelaksanaan pekerjaan erection girder menjadi salah satu tahapan kritis dalam konstruksi struktur atas flyover. Penelitian ini bertujuan untuk mengkaji pelaksanaan erection girder pada proyek Pembangunan Flyover Gelumbang melalui tinjauan terhadap metode pelaksanaan konstruksi, pengendalian mutu, serta penerapan Sistem Manajemen Keselamatan Konstruksi (SMKK). Kajian dilakukan menggunakan pendekatan deskriptif kualitatif untuk menggambarkan pelaksanaan erection girder berdasarkan kondisi aktual di lapangan. Data penelitian diperoleh melalui observasi lapangan serta studi dokumentasi terhadap dokumen teknis dan administrasi proyek. Hasil penelitian menunjukkan bahwa pengendalian mutu pada proyek Flyover Gelumbang dilakukan secara sistematis terhadap material, peralatan, pekerja, metode pelaksanaan, dan hasil pekerjaan. Kajian SMKK menunjukkan bahwa seluruh elemen rencana keselamatan konstruksi telah diterapkan secara terintegrasi. Hasil kajian ini telah memberikan gambaran bahwa integrasi pengendalian mutu dan penerapan SMKK dalam pekerjaan erection girder pada proyek Flyover Gelumbang menjadi wujud penerapan prinsip-prinsip keinsinyuran yang meliputi aspek keselamatan dan kesehatan kerja, keberlanjutan, profesionalisme, serta etika profesi keinsinyuran.
Downloads
References
Tanne, Y. A., Safira, H., Zai, O. T. R., Meilani, R., & Kurnia, S. A. (2024). Evaluation of Level Crossings (Case Study: Greater Bandung). Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal), 8(1), 32-41. https://doi.org/10.37367/jpi.v8i1.313
Prih Raharjo, E., Anisa Mahadita Candrarahayu, Tamtomo Adi, W., Widi Astuti, S., Nurhadi, M., & Dewi, P. (2026). Modeling Railway Level Crossing Accidents Using Zero-Inflated Poisson and Zero-Inflated Negative Binomial Approaches. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal), 10(1), 22-29. https://doi.org/10.37367/jpi.v10i1.604
Ihtirom, M. W., & Supriyatno, D. (2025). Analisis Kebutuhan Sarana dan Prasarana untuk Keselamatan pada Perlintasan Sebidang Kereta Api. Jurnal Media Publikasi Terapan Transportasi, 3(3), 277–284. https://doi.org/10.26740/mitrans.v3n3.p277-284
Undang-Undang Republik Indonesia Nomor 11 Tahun 2014 tentang Keinsinyuran. Lembaran Negara Republik Indonesia Tahun 2014 Nomor 61. Tambahan Lembaran Negara Republik Indonesia Nomor 5520
Yap, J. B. H., Skitmore, M., Chong, J. R., & Hon, C. K. H. (2022). Managerial measures to reduce rework and improve construction safety in a developing country: Malaysian case. Journal of Civil Engineering and Management, 28(8), 646–660. https://doi.org/10.3846/jcem.2022.17570
Ajayi, S. O., Adegbenro, O. O., Alaka, H., Oyegoke, A.S., & Manu, P.A. (2021). Addressing behavioural safety concerns on Qatari mega projects. Journal of Building Engineering, 41, 102398. https://doi.org/10.1016/j.jobe.2021.102398
American Society of Civil Engineers. (2020). ASCE code of ethics. ASCE.
Persatuan Insinyur Indonesia. (2021). Kode etik insinyur Indonesia.
Yang, X., Li, J. Q., Liu, W., Wang, K. C. P., Hatt, J., & Schwennesen, J. (2023). Selection of at-grade highway-rail crossings for grade separation. International Journal of Rail Transportation, 11(2), 227–247. https://doi.org/10.1080/23248378.2022.2060359
Congress, S.S.C., Puppala, A.J., Banerjee, A., & Patil, U.D. (2021). Identifying hazardous obstructions within an intersection using unmanned aerial data analysis. International Journal of Transportation Science and Technology, Volume 10, Issue 1, 34-48, https://doi.org/10.1016/j.ijtst.2020.05.004.
Ilham. (2025). Evaluating Socio-Economic and Safety Impacts of Grade-Separated Railway Crossings in Indonesia. Ilomata International Journal of Social Science, 6(1), 149–164. https://doi.org/10.61194/ijss.v6i1.1555
Puspitasari, M. D., Ardiansyah, A. D., Prihatanto, R., Kurniawan, M. A., & Astuti, S. W. (2026). Technical And Safety Assessment Of Grade Separation At Jpl 193 Km 182+055 Between Haurpugur And Cicalengka. Jurnal Penelitian Sekolah Tinggi Transportasi Darat, 17(1). https://doi.org/10.55511/jpsttd.v17i1.773
Lin, W., & Yoda, T. (2017). Bridge engineering: Classifications, design loading, and analysis methods. Butterworth-Heinemann/Elsevier. https://doi.org/10.1016/C2015-0-00602-5
Chen, W.-F., & Duan, L. (2014). Bridge engineering handbook: Superstructure design (2nd ed.). CRC Press. ISBN 978-1439852217
Badan Standardisasi Nasional. (2016). SNI 1725:2016: Pembebanan untuk Jembatan. Badan Standardisasi Nasional.
Dewobroto, W., & Canny, K. A. (2024). Evaluation of the Indonesian Standard Guidelines for Long-Span PC Girder Erection. Practice Periodical on Structural Design and Construction (ASCE). https://doi.org/10.1061/PPSCFX.SCENG-1424
Shrivastava, A. K. (2024). Investigation of Failures of Three Precast Post-Tensioned Segmental Concrete (PSC) Box Girder Bridges During Construction. Structural Engineering International, 34(3), 398–403. https://doi.org/10.1080/10168664.2024.2368218
Ahmad, C., Nugraheni, F., & Faisol. (2024). Development of work safety procedures for PCI Girder installation using interactive analysis models. Teknisia, 29(1), 24–36. https://doi.org/10.20885/teknisia.vol29.iss1.art3
Fitriani, A., Dradjad, K., & Saputra, J. (2022). Pengaruh penerapan SMKK terhadap pengendalian risiko pekerjaan struktur atas jembatan. Construction and Material Journal, 4(3), 157–172. https://doi.org/10.32722/cmj.v4i3.4778
Mohandes, S. R., Abdelmageed, S., Hem, S., Yoo, J. S., Abhayajeewa, T., & Zayed, T. (2022). Occupational Health and Safety in Modular Integrated Construction Projects: The Case of Crane Operations. Journal of Cleaner Production, 342, 130950. https://doi.org/10.1016/j.jclepro.2022.130950
Ali, A. H., Zayed, T., & Hussein, M. (2024). Crane Safety Operations in Modular Integrated Construction. Automation in Construction, 164, 105456. https://doi.org/10.1016/j.autcon.2024.105456
Jethwa, H. J., Pitroda, J. R., Raichura, C. S., & Poriya, N. (2025). Relative Importance Index: Help to Identify Factors During Precast Girder Erection Process. International Journal of Construction Engineering and Planning, 11(02), 51-64. https://journalspub.com/publication/ijcep/article=19138/
Jang, D.H., Roh, G.T., Jeon, C.H., & Shim, C.S. (2025). Simulation-Based Optimization of Crane Lifting Position and Capacity Using a Construction Digital Twin for Prefabricated Bridge Deck Assembly. Buildings, 15(3), 475. https://doi.org/10.3390/buildings15030475
Orfeo, A., Tubaldi, E., McAlorum, J., Perry, M., Ahmadi, H., & McDonald, H. (2023). Self-Sensing Rubber for Bridge Bearing Monitoring. Sensors, 23(6), 3150. https://doi.org/10.3390/s23063150
Meghashree, M.; Urs, Neethu; Amith, B. N.; and Shetty, Kiran K., "Elastomeric bearing performance prediction and damage effect evaluation using machine learning" (2025). Open Access archive. 13327. https://impressions.manipal.edu/open-access-archive/13327
Chen, C., Yang, C., Zhang, K., Wang, W., & Dong, L. (2023). Structural Behavior and Load Distribution Factor of a T-Girder Bridge with Various Truss Diaphragms. 28 (12). Journal of Bridge Engineering. https://ascelibrary.org/doi/abs/10.1061/JBENF2.BEENG-6171
Shaker, Fatemeh dan Rahai, Alireza. (2022). Effect of a two bearing lines deck on the bridge substructure. Structural engineering and mechanics: An international journal, 81(2), 117-129. https://doi.org/10.12989/sem.2022.81.2.117
Kementerian PUPR. (2021). Peraturan Menteri PUPR Nomor 10 Tahun 2021 tentang Pedoman Sistem Manajemen Keselamatan Konstruksi. Jakarta: Kementerian Pekerjaan Umum dan Perumahan Rakyat.
Njoko, F., Husin, N. A., Prihantono, G., Bayuaji, R., & Suswanto, B. (2025). Penerapan Profesionalisme, Etika Profesi, dan Keselamatan dan Kesehatan kerja (K3) pada Pembangunan Jalan Tol di Pulau Jawa dengan Metode Span-by-Span dan Sistem External Post-Tension pada Struktur Box Girder. Jurnal Profesi Insinyur Universitas Lampung, 6(1). https://doi.org/10.23960/jpi.v6n1.144.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
